Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Cupra Formentor

Model: Cupra Formentor MK 1 - Years 2020-2026
Part: Tire pressure warning light

Today we will see the step-by-step instructions that will allow us to reset the tire pressure warning light (TPMS) of the Cupra Formentor; before performing the reset, it is necessary that all four tires are at the operating pressure. So, we get into the car and start the dashboard; then we go to the vehicle settings on the central display and select the tire pressure option, as shown in the video. At this point, we follow the guided procedure and confirm the reset of the tire pressure warning light, verifying the reset of the warning on the dashboard!

Posted on 12 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light of the Cupra Formentor?
How do you reset the tire pressure warning light of the Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) In order to reset the tire pressure warning light on the Cupra Formentor, you first need to inflate the tires until they reach the correct pressure v…
How to reset the service in the Cupra Formentor?
How to reset the service in the Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) In this tutorial we can see how to reset the service in the Cupra Formentor, an extremely simple and quick operation, to be carried out only after co…
How do you reset the partial odometer of the Cupra Formentor?
How do you reset the partial odometer of the Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) In order to reset the partial odometer of the Cupra Formentor, you need to turn on the instrument panel so that you can navigate through the menu on …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos