Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Cupra Formentor?

Model: Cupra Formentor MK 1 - Years 2020-2026
Part: Cabin air filter

In this tutorial, we will see how to replace the cabin filter in the Cupra Formentor, a very simple and quick operation. First, let's go to the passenger side, then open the glove compartment and empty it. Next, press both sides of the drawer inward to detach it from the dashboard, locate the long rectangular cover, and open it by unlocking the corresponding clip. At this point, all that’s left to do is remove the old filter, clean the housing of any dirt residue, insert the new one, and reassemble everything by following the reverse procedure.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery in the Cupra Formentor?
How to replace the remote control battery in the Cupra Formentor?
Cupra Formentor In this tutorial, you can see how to replace the battery in the remote control of the Cupra Formentor, a very simple and quick operation. To do this,…
Replacing the Cabin Air Filter for the Cupra Formentor
Replacing the Cabin Air Filter for the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Today's guide will illustrate the necessary steps to replace the cabin air filter or pollen filter in the Cupra Formentor. First, get inside the vehi…
How to Use the Kessy Function on the Cupra Formentor
How to Use the Kessy Function on the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) In this video, we can see how to use the Kessy system, that is, Keyless access, of the Cupra Formentor. This is a keyless locking and starting system…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos