Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Cupra Ateca.

Model: Cupra Ateca MK 1 - Years 2022-2026
Part: Air filter

Today we will explain how to replace the air filter of the Cupra Ateca. To carry out the replacement, we need to open the front hood and cover the vehicle's body to avoid damaging it during the filter replacement. We use a T25 wrench to unscrew the screw on the air duct clamp in order to remove it. We remove the air duct and detach the cover of the filter box. We replace the air filter and close the cover. We reconnect the duct to the filter box and secure the clamp. We close the front hood and start the vehicle to test the functioning of the filter.

Posted on 13 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Cupra Ateca?
How to Replace the Remote Battery of the Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) In this tutorial, see how to replace the battery of the remote for the Cupra Ateca, a very simple and quick operation. To do this, you will need a sm…
How do you reset the Service light of the Cupra Ateca?
How do you reset the Service light of the Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) In order to deactivate the Service light on the Cupra Ateca, you need to turn on the instrument panel by inserting the ignition key into the correspo…
Where Are the Fuses in a Cupra Ateca?
Where Are the Fuses in a Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) All the fuses in the Cupra Ateca are housed within dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. The first …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos