Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Cupra Ateca?

Model: Cupra Ateca MK 1 - Years 2022-2026
Part: Service warning light

In order to deactivate the Service light on the Cupra Ateca, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once this is done, you can proceed by holding down the ring on the right side of the steering wheel. You can now access a menu where you will need to scroll and select the "Oil Service" option: this will allow you to hold down the ring again to make the light disappear completely from the instrument panel. Finally, you can turn off the instrument panel by removing the key.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Service reset on a Cupra Ateca
Service reset on a Cupra Ateca
Cupra Ateca (2022-2026 / MK 1) In today's guide, you will see how to reset the service light, which indicates the remaining life of the engine oil, on a Cupra Ateca, a model produc…
How to Replace the Remote Battery of the Cupra Ateca?
How to Replace the Remote Battery of the Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) In this tutorial, see how to replace the battery of the remote for the Cupra Ateca, a very simple and quick operation. To do this, you will need a sm…
Where Are the Fuses in a Cupra Ateca?
Where Are the Fuses in a Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) All the fuses in the Cupra Ateca are housed within dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. The first …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos