Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a Cupra Ateca

Model: Cupra Ateca MK 1 - Years 2022-2026
Part: Warning light – error code

In today's guide, you will see how to reset the service light, which indicates the remaining life of the engine oil, on a Cupra Ateca, a model produced from 2022 onwards. Well, let's start by turning on the vehicle's instrument panel but without starting the engine, then press the < or > button on the right side of the steering wheel until the "driving data" message appears on the information display. Use the selection wheel to scroll through the options until you reach the "interval" option and select it. Once done, press and hold the wheel for about 10 seconds to enter the service menu, and then follow the on-screen instructions to reset the service light.

Posted on 17 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Cupra Ateca?
How do you reset the Service light of the Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) In order to deactivate the Service light on the Cupra Ateca, you need to turn on the instrument panel by inserting the ignition key into the correspo…
How to Replace the Remote Battery of the Cupra Ateca?
How to Replace the Remote Battery of the Cupra Ateca?
Cupra Ateca (2022-2026 / MK 1) In this tutorial, see how to replace the battery of the remote for the Cupra Ateca, a very simple and quick operation. To do this, you will need a sm…
Customized caps for the Isofix points of the Cupra Ateca.
Customized caps for the Isofix points of the Cupra Ateca.
Cupra Ateca (2022-2026 / MK 1) The ones we see in the video are decorative caps specifically designed to cover the Isofix anchorage holes on the rear seats of the Cupra Ateca (and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos