Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Cupra Formentor?

Model: Cupra Formentor MK 1 - Years 2020-2026
Part: Service warning light

To reset the Service light on the Cupra Formentor, press and hold the OK button located on the right side of the steering wheel. Continue to hold the button until a hidden menu appears on the display in the centre of the instrument cluster. Once the screen appears, select "Service menu" and then "Reset inspection"; selecting this option will reset the Service light and restore the maintenance interval. At the end of the procedure, you can turn off the instrument cluster to confirm.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Cupra Formentor?
How to Reset the Service Light on a Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) From the instrument cluster of the Cupra Formentor, you can clear the Service light by pressing and holding the OK button located on the right side o…
How to reset the service light on a Cupra Formentor
How to reset the service light on a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) To reset the service light on a 2024 Cupra Formentor, use the controls on the steering wheel. Turn on the ignition (without starting the engine). Pre…
How to Reset the Service Light on the Cupra Formentor?
How to Reset the Service Light on the Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) You can clear the instrument cluster of the Cupra Formentor by holding down the OK button located on the right side of the steering wheel: continue t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos