Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Dokker
    4. : -board computer

Dacia Dokker - -board computer

Dacia Dokker (2013-2023 / MK 1)
How to reset the service light of a Dacia Dokker
This video will show how to reset the service light of a Dacia Dokker. Position yourself in the driving position and put the gear into neutral. Turn on the …read all…
Posted on 9 December 2022 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to reset the TPMS warning light on the Dacia Dokker
The TPMS sensor is located inside the vehicle's four rims and performs the important function of detecting the exact tire pressure in real time. In case of …read all…
Posted on 17 August 2022 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to adjust the time of the 2017 Dacia Dokker
Thanks to the following mini guide concerning the Dacia Dokker you will be able to manually change the time displayed on your car quickly and safely. First …read all…
Posted on 10 May 2024 by ScegliAuto
Car stereo (4) Spark plugs (1) Key (1) -board computer (3) Checks and maintenance (12) Headlight (1) Tail light (1) Cabin air filter (1) Clutch (1) Headlight bulb (3) Engine oil (1) Door panel (1) Tires (1) Pump (1) Fuel pump (1) Instrument cluster (6) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos