Do it yourself
| ||||
|
Dacia Dokker - Instrument cluster
Dacia Dokker (2013-2023 / MK 1)
How to reset the maintenance light on the Dacia Dokker. If the orange maintenance light appears on the instrument panel of your Renault Dokker and you don't know how to manually reset it, then you just need to …read all… Posted on 11 January 2024 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to reset the Dacia Dokker TPMS light If the TPMS tire warning light comes on on the instrument panel of your Dacia Dokker although there are no pressure losses or punctures, just follow these …read all… Posted on 19 April 2023 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to reset the Dacia Dokker tire warning light To manually reset the tire warning light on your Dacia Dokker you do not need any professional diagnostic tool, in fact, you will only need to use a single …read all… Posted on 26 November 2022 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to reset the maintenance warning light on the Dacia Dokker If on the instrument panel you notice the maintenance warning light coming on steadily (with a small wrench shown above) and you want to reset it manually, all …read all… Posted on 27 October 2022 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to reset the service on the Dacia Dokker If we have replaced in do-it-yourself mode the engine oil and the relative filter on this model of vehicle we must proceed to complete the job and go to reset …read all… Posted on 27 June 2022 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to reset the service warning light on the Dacia Dokker Whenever we go to replace the engine oil and the relative filter as indicated in the vehicle's use and maintenance manual, we must then proceed to reset the …read all… Posted on 20 May 2022 by ScegliAuto Car stereo (4) Spark plugs (1) Key (1) -board computer (3) Checks and maintenance (12) Headlight (1) Tail light (1) Cabin air filter (1) Clutch (1) Headlight bulb (3) Engine oil (1) Door panel (1) Tires (1) Pump (1) Fuel pump (1) Instrument cluster (6) Wheel (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |