Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the bulb of the heating control unit on Dacia Sandero/Logan

Model: Dacia Sandero B8 - Years 2012-2020
Part: Instrument panel light

In this video, we see how to replace the bulb that illuminates the dashboard in correspondence with the heating unit on the Dacia Sandero and Logan: we lever on the frame from the bottom, possibly with a plastic spatula to avoid scratching the bodywork, and remove the entire frame, to which all the electrical connectors are attached, which we will disconnect. With a 20 key, we remove the four screws on the sides of the air control panel; we turn it and remove the burnt bulb. We replace it with a new one, as shown by the youtuber, wearing gloves, and then we put back the air control panel, putting back the four screws and paying attention to the position of the wiring, which we will reconnect to the frame. We can reposition it in its place and check the functionality of the dashboard light.

Posted on 29 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) Replacing the license plate light on a Dacia Sandero car is an operation that follows simple and quick steps to be carried out independently. After p…
Dacia Sandero (2012-2020 / B8) Let’s go through the step-by-step instructions to reset the service light for the routine maintenance oil change on a second-generation Dacia Sandero…
Dacia Sandero (2012-2020 / B8) In this video tutorial, you will learn how to remove the radio or multimedia system from a second series Dacia Sandero, as well as from the Logan. Fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos