Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure light on the Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020
Part: Tire pressure warning light

The procedure to reset the tire pressure warning light on the Dacia Sandero is done by inserting the key into the ignition and turning on the instrument panel. You will need to navigate through the menu that appears on the display using the button with three dots located at the end of the lever on the right side of the steering wheel. When the "Set TP" message appears, you will need to hold down the button with the three dots until the message stops flashing and the tire pressure warning light turns off. After the reset, you will need to turn off and turn on the instrument panel to verify the reset of the warning light.

Posted on 9 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) To reset the tyre pressure warning light on a Dacia Sandero, insert the key into the lock and turn it to activate the instrument cluster. Then, repea…
Dacia Sandero (2021-2026 / MK 3) To reset the tyre pressure warning light on the Dacia Sandero, inflate all the tyres to the pressure indicated on the label on the driver's door. Onc…
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos