Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery on a Dacia Sandero II

Model: Dacia Sandero B8 - Years 2012-2020
Part: Battery

In this video, we see how to change the battery of a Dacia Sandero II: we open the front hood and find the battery on the right side of the engine compartment, at the bottom. We remove the battery by unscrewing the plate fixed with a 13mm bolt; we first remove the negative contact and place it far away from the battery to prevent accidental reconnection; then we lift the plastic cover of the positive connector and remove it: if the battery is equipped with it, we remove the acid vapor tube, after which we can take it by the handle and remove it. We clean the connectors from deposits with fine sandpaper; we install the new battery, covering the poles with copper grease to protect them from oxidation. We reconnect the positive pole, then the negative one, and screw the fixing plate back on. Job done.

Posted on 12 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Battery on a Dacia Sandero
How to Change the Battery on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) To change the battery on a first-generation Dacia Sandero, open the bonnet and locate the battery in the engine compartment. Remove any plastic cover…
How to Change the Remote Battery of a Dacia Sandero
How to Change the Remote Battery of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) The tutorial here for changing the remote battery of a Dacia Sandero is also applicable to the Dacia Duster and all other cars with a similar remote …
How to change the battery of the Dacia Sandero key
How to change the battery of the Dacia Sandero key
Dacia Sandero (2008-2012 / BS) To replace the battery inside the key of your first generation Dacia Sandero on your own, you only need a small crosshead screwdriver and a new batte…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos