Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

In this short guide we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Dacia Sandero. First, we open the hood of the car and start removing the plastic protection cap of the bulbs; then we disconnect the electrical connector of the light and release the metal clip to remove it, as shown in the video.

At this point we install the new low beam bulb, of the correct type and with the same attachment; then we reassemble the light and check its operation, finally securing the plastic cap.


Posted on 13 February 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Dacia Sandero?
How to Replace the Front Headlight Bulb of the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the front headlight bulb of the Dacia Sandero, open the bonnet to access the engine compartment. Next, remove the cover cap from the insid…
How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) To replace the front headlight bulb on the Dacia Sandero Stepway, open the bonnet to access the engine compartment. Next, remove the protective cap f…
How to Change the Headlight Bulb on a Dacia Sandero
How to Change the Headlight Bulb on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Here are the steps to remove and replace the headlight bulb on a Dacia Sandero. First, open the bonnet and start by removing the plastic cap found be…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos