|
Do it yourself
| |||
| ||||
How to use the inflation kit on the Dacia Sandero
Model: Dacia Sandero
MK 3
- Years 2021-2026
In this video we will see how to correctly use the inflation kit of the Dacia Sandero Stepway: If the tire puncture did not occur on the sidewall and does not exceed 4 mm, it is possible to effectively use the inflation kit: park the vehicle in a quiet area, engage the handbrake and turn on the hazard lights. The inflation kit is located in the trunk; connect the compressor hose to the cylinder, which must then be connected to the compressor. Connect the cylinder connector to the wheel valve, and then the power supply to the accessory socket. Start the car engine and start the compressor to reach the required pressure; if the pressure is not reached within 15 minutes, it means that the repair is not possible. Drive for about 3 km at low speed and then recheck the tire pressure. In any case, it is a temporary repair, only intended to reach a tire shop, and the speed should not exceed 80 km/h.
Posted on 27 May 2025 by ScegliAuto
Video tutorial
Related tutorials
Dacia Sandero
(2021-2026 /
MK 3)
.. Let's see in this video how to use the inflation kit on the Dacia Sandero: now most vehicles no longer come with a spare tire,.. …
Dacia Sandero
(2021-2026 /
MK 3)
.. Let’s see how to use the inflation kit on the Dacia Sandero. This is a kit to repair a puncture in case of emergency. C.. …
Dacia Sandero
(2021-2026 /
MK 3)
.. In this video, we will see how to use the inflation kit on the Dacia Sandero: the kit can repair punctures up to 4 mm on the tread,.. …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.477
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |