Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to use the inflation kit on the Dacia Sandero

Model: Dacia Sandero MK 3 - Years 2021-2026
Part: Checks and maintenance

Let's see in this video how to use the inflation kit on the Dacia Sandero: now most vehicles no longer come with a spare tire, so we need to learn how to use the inflation kit that is part of the onboard equipment. It will be very useful, as long as the puncture is not on the shoulder of the tire and is not larger than 4 mm. Park in a safe, level place with the handbrake engaged and turn on the hazard lights: connect the compressor hose to the canister, then connect the inflation nozzle to the wheel, and connect the power cable to the socket; start the engine, and when we reach the correct compressor pressure, we begin inflating, following the references indicated on the sticker located on the driver's door. If we cannot reach the required pressure within 15 minutes, then the repair is not possible. Drive a few kilometers at a moderate speed to allow the liquid to expand and then check the pressure again.

Posted on 19 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to use the inflation kit on the Dacia Sandero
How to use the inflation kit on the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) In this video we will see how to correctly use the inflation kit of the Dacia Sandero Stepway: If the tire puncture did not occur on the sidewall and…
How to Use the Inflation Kit on the Dacia Sandero
How to Use the Inflation Kit on the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) .. In this video, we will see how to use the inflation kit on the Dacia Sandero: the kit can repair punctures up to 4 mm on the tread,.. …
How to Replace the Timing Belt on the Dacia Sandero 1.4
How to Replace the Timing Belt on the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today's instructions will guide you through the steps to remove and replace the timing belt on the Dacia Sandero 1.4. First, open the bonnet and begi…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos