Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Dacia Dokker?

Model: Dacia Dokker MK 1 - Years 2013-2024
Part: Service warning light

To reset the Service light of the Dacia Dokker, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once the panel is turned on, you can repeatedly press the button on the end of the lever on the right side of the steering wheel. When the maintenance message appears, you will need to hold down the same button for a few seconds to make the Service light disappear: at the end of the procedure, you can release the button and turn off the instrument panel.

Posted on 5 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Dacia Dokker service warning light?
How do you reset the Dacia Dokker service warning light?
Dacia Dokker (2013-2024 / MK 1) In order to reset the Dacia Dokker Service warning light, no operation can be carried out directly from the car's instrument panel. In fact, in order…
How to reset the service light of a Dacia Dokker
How to reset the service light of a Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) This video will show how to reset the service light of a Dacia Dokker. Position yourself in the driving position and put the gear into neutral. Turn …
How to Reset the Service Light on the Dacia Dokker?
How to Reset the Service Light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) You can reset the Service light that appears on the instrument panel of the Dacia Dokker by turning on the instrument panel, inserting the key into t…

Other guides you may be interested in

    Frequently Asked Questions

    • Dokker 2013-2024 - How to reset the Dacia Dokker service warning light? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos