Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the Start & Stop system on the Dacia Sandero Stepway

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this video we can see how to permanently deactivate the start & stop system on the Dacia Sandero Stepway. If we wanted to deactivate it only for the current journey, then there would be no problem, just press the button located on the central tunnel, next to the gear lever.

However, the system would start working normally at the next turn of the key in the ignition. If we want to deactivate it permanently - but it is still very easy to go back - we have to open the hood, and remove the electrical connector located on the battery, at the negative pole.


Posted on 6 November 2025 by ScegliAuto


Related tutorials

Dacia Sandero (2021-2026 / MK 3) In this tutorial we can see how to deactivate the Start & Stop in the Dacia Sandero, an extremely simple and quick operation to be carried out in cas…
Dacia Sandero (2012-2020 / B8) This tutorial shows how to deactivate and reactivate the passenger airbag in a Dacia Sandero Stepway, a procedure to be performed whenever a rear-fac…
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos