|
Do it yourself
| |||
| ||||
How to Reset the Tyre Pressure Warning Light (TPMS) on the Dacia Duster
Model: Dacia Duster
MK 2, HM
- Years 2017-2024
Below are the instructions on how to reset the tyre pressure warning light on the Dacia Duster; before performing the TPMS reset, ensure all four tyres are at the correct operating pressure. Then get into the vehicle and start the ignition; next, use the arrow controls on the steering wheel until you reach the TPMS option, holding the up arrow to confirm and definitively reset the tyre pressure warning light from the instrument panel!
Posted on 16 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2024-2026 /
P1310)
Today's instructions will allow us to reset the tire pressure warning light of the Dacia Duster; before performing the reset of the TPMS sensors, it …
Dacia Duster
(2017-2024 /
MK 2, HM)
Below are the steps that will allow us to reset the tire pressure warning of the Dacia Duster; before resetting the TPMS sensors, it is necessary tha…
Dacia Duster
(2017-2024 /
MK 2, HM)
In this article we will see how to reset the tire pressure warning light of the Dacia Duster in case the light remains on after restoring the correct…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
