Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : Replacement of Dacia Sandero front brake pads

Dacia Sandero - Video tutorial

Model: Dacia Sandero BS - Years 2008-2012
Part: Brake pads
Operation: Replacement of Dacia Sandero front brake pads

Replacing the brake pads is a maintenance that can be easily done by yourself; the first recommendation is to secure the car once it has been raised, by applying a special car stand or by putting the wheel under the crossbar; therefore once the car has been lifted and the front wheel removed, disassemble the lower fixing pin of the caliper so that it can rotate upwards, remove the old pads, clean with the special spray and insert the new pads; retract the caliper piston r and fix it to its support by tightening the pin previously removed. Pay attention to the first braking.


Posted on 16 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2008-2012 - How many kilometers do the tablets of the Dacia Sandero last? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos