Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to locate the fuses in a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Fuse box

To locate the fuses in a second-generation Dacia Sandero, check mainly two areas. The fuse box in the cabin is located on the driver's side, on the side of the dashboard, and is accessible by opening the door and removing the corresponding cover panel. A second group of fuses and relays is situated in the engine compartment, inside a box protected by a plastic cover, near the battery. Before performing any checks, switch off the engine, turn off the ignition, and deactivate the electrical devices. Refer to the diagram in the vehicle manual to identify the fuse associated with the circuit in question. Use the appropriate tweezers to extract the component and check the filament; if it is broken, replace it exclusively with a fuse of the same amperage.

Posted on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Dacia Sandero
Where to Find the Fuse Box of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) To easily and safely locate the fuse box inside your Dacia Sandero (2012-2020), follow the instructions in this mini guide. First, park the car safel…
Where to Find the Cabin Fuse Box on the Dacia Sandero 2
Where to Find the Cabin Fuse Box on the Dacia Sandero 2
Dacia Sandero (2012-2020 / B8) To locate the fuses inside the cabin of your second-generation Dacia Sandero, follow all the steps described in this guide. First, open the driver's …
Where is the fuse box located in the cabin of the Dacia Sandero?
Where is the fuse box located in the cabin of the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) If you want to easily locate the fuse box in the cabin of your first generation Dacia Sandero, just pay attention to all the steps described below an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos