Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Front bumper

Remove the front bumper from the Dacia Sandero? Here’s how to take off the damaged bumper. Lift the car on a jack. Unscrew the fastening screws at the top of the bumper. Once the screws at the top are removed, take out the fastening screws in the wheel arch liners. Remove the last fastening screws at the bottom of the bumper. Pull the bumper away from the bodywork by hand; carry out the necessary maintenance or fit the new bumper with all the attached parts (screw in all the fastening screws). Close the bonnet after replacing.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Dacia Sandero
How to remove the front bumper of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) These short and simple steps will show us how to disassemble and replace the front bumper of the Dacia Sandero. First, we open the hood of the car an…
How to remove the front bumper of the Dacia Sandero
How to remove the front bumper of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) The steps to remove the front bumper of a Dacia Sandero vehicle are a very simple operation to perform independently. The first step is to open the f…
How to remove the front bumper of the Dacia Sandero
How to remove the front bumper of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) In this video, we will see how to remove the front bumper of the Dacia Sandero: we start by removing the screws in the front part of the wheel arch. …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos