Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Dacia Duster MK1

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Service warning light

In this short and simple guide, discover how to reset the service light for the routine maintenance of the engine oil change on the first series Dacia Duster. First, get in the vehicle and press and hold the accelerator pedal; then, turn on the ignition and press the brake pedal three times, as shown in the video. At this point, turn off the ignition, releasing both pedals; simply turn the instrument panel back on to complete the service light reset!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Dacia Duster?
How to reset the Service light on the Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) To reset the Service light on the Dacia Duster, insert the ignition key and turn it to switch on the instrument cluster. Once it is on, press the acc…
How to Reset the Tyre Pressure Light on a Dacia Duster
How to Reset the Tyre Pressure Light on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Start by sitting in the driver's seat of your Dacia Duster, then start the engine by turning the key in the ignition. Next, using the selection butto…
How to Reset the Service Light on the Dacia Duster?
How to Reset the Service Light on the Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) To reset the Service light on the Dacia Duster, turn on the dashboard without starting the engine. Once the dashboard is lit, press the clutch pedal …

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - How to reset spy service on Dacia Duster? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos