Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Dacia Sandero

Model: Dacia Sandero MK 3 - Years 2021-2026
Part: Tire pressure warning light

The TPMS sensor located inside all four wheels of your Dacia Sandero detects the exact tyre pressure in real-time. This important function allows you to immediately recognise a puncture and enhances driving safety. In case of reading errors or other factors affecting its proper operation, a manual reset is necessary. First, insert the key and turn on the ignition. Then, press the button located at the end of the right lever multiple times until you see the "Set Tp" message. At this point, hold the same button until the display stops flashing. The reset is complete.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the 2018 Dacia Sandero
How to Reset the TPMS Light on the 2018 Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today, you will learn how to reset the tyre pressure monitoring system (TPMS) light on a 2018 Dacia Sandero. It is important to perform the reset pro…
Reset the tire pressure warning of the Dacia Sandero.
Reset the tire pressure warning of the Dacia Sandero.
Dacia Sandero (2021-2026 / MK 3) Let's discover the instructions on how to reset the tire pressure warning on the Dacia Sandero; before performing the TPMS sensor reset, it is necess…
How to reset the tire pressure light on the Dacia Sandero
How to reset the tire pressure light on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) In a few simple steps, we will see the procedure for resetting the tire pressure warning on the Dacia Sandero; before resetting the TPMS sensors, it …

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos