|
Do it yourself
| |||
| ||||
How to Change Engine Oil and Filter on a Dacia Sandero
Model: Dacia Sandero
B8
- Years 2012-2020
In this video tutorial, you will see how to change the engine oil and oil filter on a Dacia Sandero. Purchase engine oil (SAE 5w-40) and an oil filter. Get into the vehicle, turn off the engine, and engage the handbrake; open the bonnet and secure it with the prop rod. Open the oil filler cap to allow the oil to drain more quickly when the time comes. Before draining the oil filter, it is advisable to add a cleaner to the engine to degrease it and remove any residues, thus reducing fuel consumption and emissions. Leave the engine running for about 5 minutes, then add the product and keep the engine running for another 15 minutes without driving the vehicle. Lift the vehicle using a hydraulic jack and place it on axle stands; position a container under the vehicle to collect the oil and unscrew the oil drain plug; wait for all the oil to drain into the container. Unscrew the oil filter and replace it with the new one. Refit the drain plug, tightening it sufficiently, lower the vehicle, and top up with new engine oil.
Updated on 16 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Sandero
(2012-2020 /
B8)
In today's video, learn how to replace the engine oil and oil filter, performing the regular maintenance service on the Dacia Sandero second series, …
Dacia Sandero
(2008-2012 /
BS)
Replace the engine oil on a Dacia Sandero? Replace oil and filter at the mileage indicated in the owner's manual. Lift the car with a jack to access …
Dacia Sandero
(2008-2012 /
BS)
How to replace the engine oil filter on a Dacia Sandero? Follow these steps: lift the car with a column lift, unscrew the bolt from the oil sump and …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open the Bonnet of a Renault Megane if the Lever is Broken?
If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |