Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Driver's Side Front Door Panel of the Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

Remove the front door panel from a 2015 Dacia Duster. Use a magnet to retrieve screws that may be hidden in tight spots.

Start by prying off the handle with a plastic spatula, then do the same for the window switch panel: here you need to disconnect the various connectors using a small screwdriver. Next, remove the screws from the handle.

There is a hidden screw under a small cover: remove that as well. Now you can start unscrewing the outer screws of the panel, then remove the speaker cover.

There are also 4 screws here: remove them along with the 4 screws holding the panel behind the speaker. These are the last ones.

At this point, you can detach the panel firmly but gently. You need to detach only the rod connecting the handle opening to the panel.

Rotate the panel and hold the rod in place. Do the same when reassembling.

If any rubber clips remain attached to the door, reattach them to the panel for better reassembly.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Dacia Duster (2010-2017 / MK 1, HS) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…
Dacia Duster (2017-2024 / HM, MK 2) Next, we will see the procedure for removing and replacing the front door panel of the Dacia Duster. First, open the front door of the vehicle and st…
Dacia Duster (2017-2024 / HM, MK 2) In this video tutorial, learn how to remove and replace the front door panel of the Dacia Duster by following these simple and quick steps. First, op…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos