Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Pros and Cons of the Dacia Sandero GPL

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

The Dacia Sandero Stepway has pros and cons that you should know if you are considering purchasing it. Dacia has high maintenance costs, which are necessary, but the service costs are relatively low. If you buy the model with GPL, be aware that the gas cylinder will need to be replaced after 10 years of use. The vehicle has a good body and excellent suspension, allowing you to travel long distances without issues.

The engine also does not present problems.

One downside is that the car cannot be parked on level -1 as the engine revs become too low.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Replacing the LPG Filter on a Dacia Sandero MK3
Replacing the LPG Filter on a Dacia Sandero MK3
Dacia Sandero (2021-2026 / MK 3) This video shows how to change the LPG filter (gas phase) on a Dacia Sandero MK3, which was replaced at 18,640 miles, as recommended by the manufactu…
How to Replace the Air Vent in a Dacia Sandero II LPG
How to Replace the Air Vent in a Dacia Sandero II LPG
Dacia Sandero (2012-2020 / B8) In this video, we will see how to replace the air vent in the Dacia Sandero II LPG: the YouTuber replaces only one, but the procedure is the same for…
How do you replace the LPG liquid phase filter in a Dacia Sandero II TCe 90 LPG?
How do you replace the LPG liquid phase filter in a Dacia Sandero II TCe 90 LPG?
Dacia Sandero (2012-2020 / B8) Stay calm because to replace the LPG liquid phase filter, it is necessary to follow some precautions and steps, but nothing that cannot be dealt with…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos