Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Wing on a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the front wing on a Dacia Duster, open the bonnet to access the screws securing it from the side of the engine bay: once these screws are loosened, proceed to loosen the screws located inside the corresponding wheel arch. Next, loosen the screws securing the corresponding headlamp, removing it to detach the wing.

After removing the wing, insert a new replacement part, securing it properly with the appropriate screws.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

Dacia Duster (2017-2024 / HM, MK 2) Learn how to fit mud flaps on the Dacia Duster: as the YouTuber rightly points out, the Duster's wheels are large and somewhat exposed, so when there…
Dacia Duster (2010-2017 / MK 1, HS) Remove the front bumper of the Dacia Duster if you need to replace it. Use a jack to lift the vehicle. Lift the bonnet and secure it, then raise the …
Dacia Duster (2010-2017 / MK 1, HS) To replace the front headlamp bulb on a Dacia Duster, open the bonnet to access the rear of the headlamp. Remove the circular cover that protects the…

    Frequently Asked Questions

    • Duster 2017-2024 - What's the problem with the Dacia Duster's LPG? Read answer
    • Duster 2017-2024 - Where is the lpg filter located in the Daciaa Duster? Read answer
    • Duster 2010-2017 - Where is the inertia switch of the Dacia Duster located? Read answer
    • Duster 2017-2024 - What does the Dacia Duster "Anti-Pollution Control" label mean? Read answer
    • Duster 2017-2024 - Where is the horn of the Dacia Duster located? Read answer
    • Duster 2017-2024 - Where do i find the jack on a Dacia Duster? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos