Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on a Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Front bumper

Remove the front bumper of the Dacia Duster if you need to replace it. Use a jack to lift the vehicle. Lift the bonnet and secure it, then raise the car on a jack. Unscrew the bolts located at the bottom of the bumper, and using a plastic or metal lever, remove the securing rivets located at the top of the bumper. Once the rivets (bolts) at the top are removed, unscrew the screws located in the wheel arch liners. Remove the bumper from the vehicle body with your hands; proceed to replace the old bumper. Screw all the securing screws around the front bumper.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front headlight of the Dacia Duster?
How do you remove the front headlight of the Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) In order to remove the front headlight of the Dacia Duster, you need to open the hood so that you can loosen the screws that secure the headlight fro…
How to replace the horn of the Renault Duster - Dacia Duster
How to replace the horn of the Renault Duster - Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Today's main instructions will show us the process of disassembling and replacing the horn or acoustic warning device of the Renault Duster, as well …
How to Remove the Front Door Panel of a Dacia Duster
How to Remove the Front Door Panel of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos