Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

First, release the bonnet from the appropriate lever and lift it. Now, start removing the screws located on the upper edge of the bumper, specifically above the central grille. Next, continue by removing the clips indicated on the lower protective panel.

Also, remove the screws found on the inner side of the wing; repeat this operation on both sides of your vehicle. Use a screwdriver to gradually extract the bumper and then disconnect the connector at the back.

Reverse the steps for reassembly.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to replace the horn on a Renault Duster - Dacia Duster
How to replace the horn on a Renault Duster - Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia…
Removing the Front Bumper on a Dacia Duster
Removing the Front Bumper on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Remove the front bumper of the Dacia Duster if you need to replace it. Use a jack to lift the vehicle. Lift the bonnet and secure it, then raise the …
How to Replace the Diesel Filter on a Dacia Duster
How to Replace the Diesel Filter on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdr…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos