Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install an Additional Control Unit on a Dacia Jogger

Model: Dacia Jogger MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

In this video, you will see how to install an additional control unit on a Dacia Jogger: it is simple as there are no covers to remove from the engine. You can easily find the map sensor and the boost sensor, which are highlighted in blue in the video.

Remove the map sensor by pulling back the connector and replacing it with that of your control unit; connect the factory map sensor to the corresponding plug. Repeat the same operation for the boost sensor: remove the factory connector and insert that of the control unit, and connect the factory boost sensor to the corresponding plug.

Now connect the unit to the wiring, position it in its protective casing away from direct heat and moving parts, and secure it with cable ties. The control unit for the Dacia Jogger costs £174.99 on the bluesparkautomotive.com website.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Where Is the OBD Port on the Dacia Jogger?
Where Is the OBD Port on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) In this new guide for all of you who own a Dacia Jogger, we will help you easily find the OBD port of the car so you can connect a diagnostic tool an…
Where is the OBD2 port located on the Dacia Jogger 2022
Where is the OBD2 port located on the Dacia Jogger 2022
Dacia Jogger (2021-2026 / MK 1) Locating the OBD2 port on your Dacia Jogger (2022 model) is very simple, just follow the steps outlined in this guide. First, open the driver's side …
How to Reset the Tyre Warning Light on a Dacia Jogger?
How to Reset the Tyre Warning Light on a Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos