Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on the Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Timing belt

The first thing to do when you want to replace the timing belt on the Dacia Sandero is to open the bonnet, secure the wheels, and lift the car. After lifting the car, you can proceed to remove the front wheels and finally unscrew and remove the fastening elements of the wheel arch. Using a 13mm spanner, pull the pulley and then remove the timing belt. Now let's start the assembly. Install the new belt, using the 13mm spanner to slowly pull the pulley and place the pulley on the tensioner belt. Rotate the crankshaft several times to check the operation of the belt; for this operation, use an 18mm spanner. Install the wheel arches and tighten their elements, insert the wheel, and screw in the bolts. Finally, lower the car and close the bonnet.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Dacia Sandero 1.5 DCI
Replacing the Timing Belt on the Dacia Sandero 1.5 DCI
Dacia Sandero (2012-2020 / B8) Follow the main instructions below to remove and replace the timing belt on the Dacia Sandero 1.5 DCI. First, raise the vehicle and remove the front …
How to Replace the Timing Belt on the Dacia Sandero 1.4
How to Replace the Timing Belt on the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today's instructions will guide you through the steps to remove and replace the timing belt on the Dacia Sandero 1.4. First, open the bonnet and begi…
When to Change the Timing Belt on the Dacia Sandero?
When to Change the Timing Belt on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) In this video tutorial, you can see when it is possible to change the timing belt on the Dacia Sandero. It is important to know that the timing belt …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos