Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Fuel pump

How to remove the fuel pump from a Dodge Journey (Freemont)? First, disconnect the battery cables, then, remove the tank from the underside of the car (lift the car with a column lift). Use a socket to undo the securing screws around the pump, use a chisel to undo the large securing pin of the fuel pump, disconnect the power terminals and the liquid circulation hoses. Extract the floating fuel pump from its housing along with the attached parts. Install a new pump in the tank (with all the attached parts) and refit it under the vehicle.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the fuel pump on Dodge Journey
How to disassemble the fuel pump on Dodge Journey
Dodge Journey (2008-2020 / MK 1) We do not know how to disassemble the tank of the car to remove the pump? Let's see how the fuel pump is disassembled and replaced. We lift the car w…
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…
How to Remove the Cabin Air Filter on a Dodge Journey
How to Remove the Cabin Air Filter on a Dodge Journey
Dodge Journey (2008-2020 / MK 1) In this video, learn how to remove the cabin air filter on a Dodge Journey. Open the glove compartment and unclip the plastic guides (located at the …

Other guides you may be interested in

Oil and Oil Filter Replacement on Suzuki RMZ 250 (2013)

Descriptive guide for replacing the engine oil and oil filter on a 2013 Suzuki RMZ 250. Obtain 1 litre of Suzuki SAE 10W40 oil and a K&N KN-207 oil filter. Position the bike on a central stand. Place a container for oil disposal under the engine. Start the engine and let it warm up, then turn it off. Using a ratchet and a 13mm socket, unscrew the two oil drain plugs located under the engine and let it drain. Using a ratchet and a 10mm socket, unscrew the two screws located on the side of the oil filter cover, on the right side of the engine. Remove the filter cartridge and clean the housing thoroughly. Insert the new filter in the same position as the old one. Screw the cover and the two drain plugs back on. Unscrew the oil filler neck located on the right side of the crankcase and pour in the oil. The manufacturer specifies 950ml for oil only, and 1000ml with filter replacement.

Watch the video!


by ScegliAuto

More videos