Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Dodge Challenger?

Model: Dodge Challenger MK 3 - Years 2008-2023
Part: Service warning light

In this tutorial, you will see how to reset the oil service on a Dodge Challenger, a very simple and quick operation to perform only after completing all required maintenance tasks. First, insert the key and turn on the ignition. Then, within a few seconds, fully press the accelerator pedal three times in quick succession. Once done, turn off the ignition, turn it back on, and start the engine, checking that the operation was successful. If not, repeat the procedure, ensuring not to wait too long after turning on the ignition.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light in a Dodge Challenger?
How to Reset the Oil Service Light in a Dodge Challenger?
Dodge Challenger (2008-2023 / MK 3) In this tutorial, you will see how to reset the oil service light in a Dodge Challenger, a very simple operation. Before proceeding, ensure that all …
How to Remove the Airbag from a Dodge Challenger?
How to Remove the Airbag from a Dodge Challenger?
Dodge Challenger (2008-2023 / MK 3) Good morning, today you will remove the airbag from a Dodge Challenger. Start by sitting in the driver's seat of the car. Next, locate the airbag cov…
How to Reset the Oil Light on a 2009 Dodge Challenger
How to Reset the Oil Light on a 2009 Dodge Challenger
Dodge Challenger (2008-2023 / MK 3) To correctly complete the manual reset of the engine oil light on your Dodge Challenger (2009), follow the instructions in this guide. First, get int…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos