Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the DS 7

Model: DS DS 7 MK 1 - Years 2020-2026
Part: Service warning light

In this video, you will see how to reset the service light on the DS 7, where an icon in the shape of a spanner appears. Once all necessary operations are completed, proceed to reset the notification system. Sit in the driver's seat, press and hold the button located at the top of the stalk on the left side of the steering wheel, then press the start button to turn on the instrument panel. On the left display, a countdown from ten to zero will begin, after which a confirmation message of the reset will appear.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the DS 7?
How do you reset the Service light on the DS 7?
DS DS 7 (2020-2026 / MK 1) In order to reset the Service light on the DS 7, you need to press and hold the button located at the end of the lever on the left side of the steeri…
How to reset the service light on the DS 7
DS DS 7 (2020-2026 / MK 1) Today, we will see the procedure to reset the service light for the routine maintenance oil change on the DS 7. First, get in the vehicle and press a…
How to reset the service light on the DS7
How to reset the service light on the DS7
DS DS 7 (2020-2026 / MK 1) Today we will show you how to perform reset operations on a DS 7 vehicle when the service light comes on. To reset the light, we need to turn on the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos