Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Fiat Toro
    4. : -board computer

Fiat Toro - -board computer

Fiat Toro (2016-2023 / MK 1)
How to reset the oil light on Fiat Toro
In this video tutorial we can see how to reset the oil warning light on a Fiat Toro by following a few simple steps that will guide you towards correct …read all…
Posted on 20 April 2023 by ScegliAuto
Fiat Toro (2016-2023 / MK 1)
How to reset the engine oil light on Fiat Toro
In this video tutorial we can see how to reset the oil light on a Fiat Toro. When the oil light comes on, the first thing you need to do is go and change the …read all…
Posted on 21 December 2022 by ScegliAuto
Fiat Toro (2016-2023 / MK 1)
How to reset the Fiat Toro service?
After having carried out the coupon which provides for the replacement of the oil and the filter, it will be necessary to reset the service signal present on …read all…
Posted on 4 December 2022 by ScegliAuto
Fiat Toro (2016-2023 / MK 1)
How to reset the service light on the Fiat Toro
In order to reset the oil change service indication on the car, it is necessary to follow the procedure below: access the driver's seat and turn the key to …read all…
Posted on 11 November 2022 by ScegliAuto
Fiat Toro (2016-2023 / MK 1)
How to reset the service on the Fiat Toro?
After replacing the engine oil on the car, it is necessary to delete the service signal on the instrument panel, to do this it is necessary to switch on the …read all…
Posted on 8 May 2024 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Air Vents (1) Key (2) Air conditioning (1) -board computer (5) Checks and maintenance (4) Differential (1) Spacers (1) Fog lights (1) Cabin air filter (3) Light bulb (1) Interior lights ceiling light bulb (1) Engine (1) Engine oil (2) Door panel (1) Fuse box (1) Suspensions (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos