Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Fiat Ducato?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Fiat Ducato, inflate the tyres to the recommended pressure value: this value is indicated on the sticker affixed to the driver’s door pillar. Once the tyres are inflated, go inside the cabin and connect a diagnostic tool to the vehicle's OBD port, located just below the steering column.

By following the instructions for resetting the light, you can complete the procedure by disconnecting the scanner and then turning off the ignition.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on the Fiat Ducato
How to Reset the TPMS Light on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Today, you will learn how to check the tyre pressure and reset the TPMS light on a Fiat Ducato vehicle. To check the tyre pressure, it is essential t…
How is the tire pressure reset done in the 2024 Fiat?
How is the tire pressure reset done in the 2024 Fiat?
Fiat Ducato (2014-2026 / X290) The tire inflation pressure, as is known, plays a very important role, as the safety of the vehicle depends on it, so it cannot be neglected. If the …
How to reset the inspection light on the Fiat Ducato
How to reset the inspection light on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) If you own a Fiat Ducato (X290) and want to learn how to correctly reset the inspection light on the instrument panel display, all you have to do is …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos