Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Shock Absorbers on a Fiat Panda 3

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Shocks

See other generations:
Video tutorial

To replace the rear shock absorbers on a Fiat Panda, move to the back of the vehicle, lower yourself to work, and unscrew the lower mounting bolt of the shock absorber using a Torx E18 socket. Using a 15mm hex key, unscrew the upper mounting bolt, remove the old shock absorber, and insert the new one after compressing and decompressing it a few times to mix the gas and oil. Place it in position starting with the upper mount, then the lower one. Repeat the same steps on the other side of the vehicle.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorbers on a Fiat Panda
How to Replace the Rear Shock Absorbers on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear shock absorbers on a Fiat Panda, lift the car with a jack or ramp so that the rear wheels do not touch the ground. Remove the rea…
Replacing the Front Shock Absorbers on the Fiat Panda 169
Replacing the Front Shock Absorbers on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to remove and replace the front shock absorbers on the Fiat Panda 169, second series. First, lift the vehicle and …
How to replace the front shock absorbers on the Fiat Panda?
How to replace the front shock absorbers on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) This tutorial shows how to replace the front shock absorbers on the Fiat Panda, a relatively simple task if you have good manual skills. First, lift …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos