Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorbers on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Shocks

To replace the rear shock absorbers on a Fiat Panda, lift the car with a jack or ramp so that the rear wheels do not touch the ground. Remove the rear wheels by loosening the bolts that secure them: once removed, you can access the rear components, including the shock absorbers. These are secured in place with a bolt at the top and one at the bottom. After removal, install the new ones and reattach the wheels.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorbers of a Fiat Panda
How to Replace the Rear Shock Absorbers of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, we will explain how to replace the rear shock absorbers of a Fiat Panda model 2 independently. To remove the rear shock absorbers, lift the re…
How to Replace the Rear Shock Absorbers on a Fiat Panda 141?
How to Replace the Rear Shock Absorbers on a Fiat Panda 141?
Fiat Panda (1980-2003 / 141, MK 1) This video describes the various steps to replace the rear shock absorbers on a Fiat Panda model 141. Start by removing the wheel, then unscrew the s…
How to replace the front shock absorbers on the Fiat Panda?
How to replace the front shock absorbers on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) This tutorial shows how to replace the front shock absorbers on the Fiat Panda, a relatively simple task if you have good manual skills. First, lift …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos