Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorbers of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Shocks

Today, we will explain how to replace the rear shock absorbers of a Fiat Panda model 2 independently. To remove the rear shock absorbers, lift the rear of the vehicle and remove the left and right rear wheels. Using a socket wrench with a 15 mm insert, unscrew the upper fastening bolt of the shock absorber, and with an 18 mm socket wrench with an extension, remove the lower fastening bolt. Remove the shock absorber and insert the new one, pumping several times in the cylinder. Position the shock absorber and mount the lower fastening bolt using a torque wrench. With the help of a jack, align the bolt housing and secure the shock absorber support by inserting the upper bolt. Remove the jack and perform the same operation for the left rear shock absorber. Refit the rear wheels and lower the vehicle.

Posted on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorbers on a Fiat Panda
How to Replace the Rear Shock Absorbers on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear shock absorbers on a Fiat Panda, lift the car with a jack or ramp so that the rear wheels do not touch the ground. Remove the rea…
How to Replace the Rear Shock Absorbers on a Fiat Panda 141?
How to Replace the Rear Shock Absorbers on a Fiat Panda 141?
Fiat Panda (1980-2003 / 141, MK 1) This video describes the various steps to replace the rear shock absorbers on a Fiat Panda model 141. Start by removing the wheel, then unscrew the s…
How to replace the front shock absorbers on the Fiat Panda?
How to replace the front shock absorbers on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) This tutorial shows how to replace the front shock absorbers on the Fiat Panda, a relatively simple task if you have good manual skills. First, lift …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos