Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front shock absorbers on the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shocks

See other generations:
Video tutorial

This tutorial shows how to replace the front shock absorbers on the Fiat Panda, a relatively simple task if you have good manual skills. First, lift the front of the vehicle, then open the bonnet and loosen the upper mounting bolt of the shock absorber in question.

Next, remove the wheel, disconnect the brake line, and detach the anti-roll bar link. At this point, unscrew the lower mounting bolt, remove the shock absorber, position the replacement, and follow the reverse procedure.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorbers on a Fiat Panda
How to Replace the Rear Shock Absorbers on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear shock absorbers on a Fiat Panda, lift the car with a jack or ramp so that the rear wheels do not touch the ground. Remove the rea…
Replacing the Front Shock Absorbers on the Fiat Panda 169
Replacing the Front Shock Absorbers on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to remove and replace the front shock absorbers on the Fiat Panda 169, second series. First, lift the vehicle and …
Replacing the Shock Absorbers on a Fiat Panda 3
Replacing the Shock Absorbers on a Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) To replace the rear shock absorbers on a Fiat Panda, move to the back of the vehicle, lower yourself to work, and unscrew the lower mounting bolt of …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos