Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Clutch Cable on a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years 1980-2003
Part: Clutch

In this video, learn how to remove the clutch cable on a Fiat Panda. Lift the bonnet and secure it. Then, using a socket spanner, undo the locking pins of the clutch cable. Start by removing the clutch cable's securing pins as shown in the video. Once the bolts are undone from their seat, remove them. Pull the clutch cable through into the interior of the car. Once the cable is removed, fit the new part in the engine bay. Finally, tighten the pins properly and test the clutch's correct operation. Adjust the tension as necessary.

Updated on 28 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the clutch cable in the Panda.
How to replace the clutch cable in the Panda.
Fiat Panda (2003-2012 / 169, MK 2) Changing the clutch cable on a Fiat Panda is not a difficult operation. First, you will need to remove the battery and air filter assembly as shown i…
Replacement of the clutch of the Fiat Panda 1.4
Replacement of the clutch of the Fiat Panda 1.4
Fiat Panda (2003-2012 / 169, MK 2) Today's guide will show us the process of disassembling and replacing the clutch of the Fiat Panda 1.4. First, we open the hood and start by removing…
Replacing the clutch on the Fiat Panda 900 Mk1
Replacing the clutch on the Fiat Panda 900 Mk1
Fiat Panda (1980-2003 / MK 1, 141) In this video tutorial we will see how to remove and replace the clutch plates on the Fiat Panda 900 first series, following the instructions below. …

Other guides you may be interested in

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos