Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bushings from the Stabiliser Bar on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Anti-roll bar

See other generations:
Video tutorial

In this video, learn how to remove and replace the stabiliser bar along with the bushing on a Fiat Punto. Position your car on a column lift, raising it to a comfortable height for work.

Unscrew the wheel bolts with a socket wrench or air drill and remove the wheel. Next, begin unscrewing the bolts of the stabiliser bar with a socket wrench.

Unscrew the bolts located under the plate that holds the stabiliser bar, then pull the bushing off the plate by hand. Fit the new bushing with the plate, then screw it in. Reattach the stabiliser bar with all its associated bolts.

Finally, refit the wheel with the bolts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Stabiliser Bar Linkages on the Fiat Grande Punto
How to Replace the Stabiliser Bar Linkages on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video shows how to change the stabiliser bar linkages on the Fiat Grande Punto 199. You will need to lift the vehicle and remove the front wheel…
How to Remove the Track Rod End on Fiat Punto
How to Remove the Track Rod End on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Is the track rod end damaged? Here's how to remove it on a Fiat Punto. Lift the car on a column lift, securing it at a comfortable height to work. Un…
How to Install Roof Bars on a Fiat Punto 5-Door
How to Install Roof Bars on a Fiat Punto 5-Door
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Hello, today we will see how to install roof bars on our Fiat Punto. After selecting the roof bars that best suit our car, we can proceed with the in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos