Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat Cushion on a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years 1980-2003
Part: Seat

Learn how to remove the front seat of a Fiat Panda after taking it out of the cabin. This guide explains how to proceed: unscrew the securing bolts from the side joints of the seat with a screwdriver, use a lever to detach the plastic rails welded to the fabric. Detach the seat base from the rest of the seat, pull the fabric off the padding, and remove the fabric from the backrest as shown in the video. Replace the various coverings with new fabrics. Finally, reinstall the front seat in the car, tightening the securing bolts into the sliding rails.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you access the compartment under the passenger seat of the Fiat Panda?
How do you access the compartment under the passenger seat of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To access the compartment under the passenger seat of the Fiat Panda, lift the seat pad from the front, pull it forward and then lift it from the rea…
Removing the front bumper Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Hello everyone! In this tutorial you will be shown how to remove the front bumper on old model Fiat Panda. Although it is possible to remove the bump…
How to replace the rear windshield wiper of the Fiat Panda
How to replace the rear windshield wiper of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you are planning to replace the rear windshield wiper of your Fiat Panda second series by yourself, just read the following guide carefully and ap…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos