Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the license plate light bulb of a Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Light bulb

See other generations:
Video tutorial

In this video we can see how to change the license plate bulb of a Fiat Ducato: we will only need a flat head screwdriver, the new bulb and the willingness to try. The bulb is a C5W and with the screwdriver we remove the transparent part, being careful not to break anything; we remove the bulb that is wedged between the two metal poles on the sides of the compartment: The space in which to insert them is really tight, so it is easier to remove them than to put them back in place: let's also remember that it is good practice not to touch them with bare hands, to avoid drastically reducing their lifespan.

With a little skill we manage to wedge it in and then put the transparent plastic back in place, fitting the groove that gives us the right direction to put it back in place.


Posted on 4 January 2025 by ScegliAuto


Related tutorials

Replacing the Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) How do you replace the headlamp bulb on a Ducato? Lift the bonnet and find the back of the front headlamp. You can remove the front headlamp if space…
How to Replace the Front Headlamp Bulb on a Fiat Ducato
How to Replace the Front Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To replace the front headlamp bulb on a Fiat Ducato, open the bonnet to access the components inside the engine bay. Specifically, you need to reach …
Location of the VIN number on the Fiat Ducato
Location of the VIN number on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this video we can see where the legal chassis number (VIN: Vehicle Identification Number) of the Fiat Ducato is located. The chassis number stampe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos