Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight Bulbs on a Fiat 500L

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

To remove the headlight bulbs on a Fiat 500L, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Locate the inspection cap on the back of the headlight and remove it. At this point, you will find the bulbs with metal clips.

Pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver.

Install the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlight housing. Finally, close the headlight with the inspection cap.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Replacing Bulbs on a Fiat 500L
Replacing Bulbs on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Replace the non-functioning bulbs on a Fiat 500L. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure …
Removing Front Headlamp Bulb on Fiat 500L
Removing Front Headlamp Bulb on Fiat 500L
Fiat 500 (2012-2023 / 500 L) Remove the front headlamp bulb on the Fiat 500L. Open the bonnet by pulling the lever located at the bottom right of the dashboard. Locate the inspec…
Replacing the Rear Light Bulbs on the Fiat 500L
Replacing the Rear Light Bulbs on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, see how to dismantle and replace the rear light bulbs on the Fiat 500L, following the instructions below. First, open the boot of the …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos