Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the drawer of the Fiat Ducato

Model: Fiat Ducato MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

See other generations:
Video tutorial

Today we will explain how to make internal modifications to the Fiat Ducato. Specifically, we will explain how to remove the central drawer to insert a cup holder in its place.

The first step to be carried out is to open the glove compartment and then proceed with the removal of the upper screws. The second step is to remove the drawer cover.

The third step is to disassemble the inside of the drawer starting from the top and then the bottom, once the compartment is removed we proceed with the installation of the cup holder. The first step is to insert the cup holder structure inside.

The second step is to insert the cup holder and tighten it with the screws on the sides.


Posted on 12 January 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Fiat Ducato?
How to Replace the Cabin Filter in a Fiat Ducato?
Fiat Ducato (2002-2006 / ) This video demonstrates how to replace the cabin air filter in the Fiat Ducato 2 van, a very simple operation. Start by opening the central glove com…
How to Replace the Fuses on a Fiat Ducato
How to Replace the Fuses on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) How do you access the dedicated fuse box on a Fiat Ducato? Open the cover and enter the vehicle body, remove the trim on the right side of the steeri…
How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos