Do it yourself
Frequently asked questions about cars and motorcycles

How can the engine malfunction indicator light be reset in the Fiat Doblò?

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Warning light – error code

The engine malfunction indicator light identifies a series of issues and the correct solution, regarding the identification of one or more of these, can be found in computerized diagnostics, obviously carried out in the workshop. In the video tutorial presented here, the search for the fault is shown by connecting the electronic device to the vehicle's Obd port and, after scanning, the result is produced, namely that the sensor for controlling the temperature of the air intake into the engine is not functioning properly. Clearly, it is removed and replaced, subsequently resetting, always with the aforementioned device, the anomaly present.

Posted on 24 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) The engine malfunction warning on the onboard computer of a car, the Fiat Doblo in this case, but also in other cars, could occur for various reasons…
Fiat Doblo (2022-2026 / Doblo -3) It will be possible to reset the Service light shown on the instrument panel of the Fiat Doblò by holding down the button with the wrench icon locate…
Fiat Doblo (2022-2026 / Doblo -3) You can reset the Service light that is shown on the Fiat Doblò by holding down the button located on the bottom left side of the steering column: yo…

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the yellow warning light with an exclamation point in a triangle indicate in the Fiat Doblò? Read answer
    • Doblo 2009-2021 - How to reset the radio of the Fiat Doblò? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos