Do it yourself
Frequently asked questions about cars and motorcycles

How to Refill the Windscreen Washer Reservoir on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

Watch this video to learn how to carry out maintenance yourself and save on labour costs. To remove the cap for refilling the windscreen washer fluid on a Fiat Grande Punto: pull the plastic lever located at the bottom left of the dashboard, lift the bonnet and secure it. Next, locate the windscreen washer reservoir cap and unscrew it by hand.

Ensure this operation is performed with the engine off for safety reasons. Tighten the cap with the appropriate thread, and close the bonnet after maintenance.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will learn how to remove the wiper motor from a Fiat Grande Punto. First, remove the wipers by unscrewing the nuts to take them…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the wipers on a Fiat Grande Punto, lift the wiper arm off the windscreen until it is vertical. Rotate the blade to access the fixing point…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and repair the windscreen washer reservoir of the Fiat Grande Punto, as well as the Punto E…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos