Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Fiat 500?

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

In order to program the key of the Fiat 500, you must insert the blank key into the corresponding ignition block, so that it is then possible to connect a diagnostic tool: this port will be located in the dashboard immediately below the steering column.

Once the connection has been made, it will be possible to select the model of the car in question and its version, then follow the instructions that allow you to connect the key. In this way, it will be possible to verify that it functions correctly, disconnecting the scanner.


Posted on 12 February 2025 by ScegliAuto


Related tutorials

How do you program the key for the Fiat 500X?
How do you program the key for the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) It will be possible to program the key for the Fiat 500X by inserting the virgin key into the ignition switch and turning it to start the instrument …
How to program a second key on the Fiat 500X
How to program a second key on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Programming a second key on a vehicle is a simple and quick operation to perform independently, as on some vehicles it is not necessary to connect an…
How do you program the key of the Fiat 500X?
How do you program the key of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In order to program the key of the Fiat 500X, it will be necessary to insert the blank key into the corresponding lock and turn it to position two to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos