Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light

If you want to correctly complete the procedure that allows you to disassemble the rear light of your new Fiat 500, then all you have to do is read the following guide carefully and follow the various steps. First of all, turn off the vehicle and reach the rear area. Then lift the hood completely and use a specific key to unscrew the two screws located on the side of the headlight. Once you have done this, pull the rear light towards you and disconnect the electrical connector to complete the procedure correctly.

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Light on a Fiat 500 Abarth
Removing Rear Light on a Fiat 500 Abarth
Fiat 500 (2012-2023 / 500 L) How to remove the rear light on a Fiat 500 Abarth? Here’s how to disassemble the light. Lift the tailgate, unscrew the securing screws on the side of…
Replacement of the rear fog light bulb of the Fiat 500.
Replacement of the rear fog light bulb of the Fiat 500.
Fiat 500 (2007-2024 / 312) Let's briefly see the instructions that will allow us to disassemble and replace the rear fog light bulb of the Fiat 500. To access the rear fog ligh…
How to Remove the Rear Light on Fiat 500L
Fiat 500 (2014-2022 / 500 X) How to remove the rear light on Fiat 500L? Follow these steps to disassemble the part: first, open the boot lid, then use a lever to remove the plast…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos