Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the rear door panel of the Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
This video is currently unavailable

The video here presents, explains, and shows one of the reasons why it may be necessary to disassemble the interior panel of a car door, in this case of the Fiat Punto, namely the broken window mechanism to be repaired or replaced. It is necessary to unscrew the screws of the handle, the armrest, the entire perimeter of the panel, and it ends with the disassembly of the aforementioned window lifter lever, mounted in a snap-in manner.

Now you are ready to grab the panel and pull it, thus detaching it from the door, having at this point the opportunity to carry out all the necessary work to our liking and comfortably.


Posted on 20 February 2025 by ScegliAuto


Related tutorials

How to remove the front door panel of the Fiat Grande Punto
How to remove the front door panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will show you how to remove and replace the front door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the…
How to Remove the Door Panel of a Fiat Punto Evo?
How to Remove the Door Panel of a Fiat Punto Evo?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the door panel of a Fiat Punto Evo, loosen the screws that secure it to its housing: these screws are located inside the handle housing, at…
Removing the Front Door Panel of the Fiat Punto
Removing the Front Door Panel of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide shows you how to remove and replace the front door panel of the Fiat Punto, following the instructions below. First, open the front door a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos